Bridge Expansion Joints & Elastomeric Bearings
Elastomeric bridge bearings, Multiflex rubber expansion joints, seismic isolators and tunnel segment gaskets — manufactured to EN 1337, EN 15129, EN 681 and AASHTO, CE-documented, and delivered across the GCC. Sizing tables are engineered to your project loads — values are never estimated.
Send Your BOQ — Priced FastTalk to an Engineer on WhatsAppManufacturing expansion joint covers since 2003. Factory-direct from our own plant. Datasheets and shop drawings issued with every quotation.
Bridge & structural bearings, engineered to your loads
Plain pads and laminated (steel-reinforced) bearings, plus guided and fixed types with PTFE and stainless-steel sliding surfaces. Rectangular, square and circular forms from 150 to 1500 mm, custom-made to size with shear modulus G from 0.6 to 1.35 N/mm². No moving parts — thermal movement and beam rotation are taken by the shear capacity of the elastomer itself.
STANDARD SIZE TABLES: 79 CIRCULAR + FULL RECTANGULAR RANGE TO EN 1337-3. CAPACITY TABLES ISSUED TO EACH PROJECT’S LOADS.
Get Bearing Sizing For Your Loads
Watertight rubber expansion joints, ±25 to ±500 mm
Steel reinforcing profiles fully vulcanised into a natural-rubber element for total corrosion protection. The compound resists oil, fuel, salt, sand, UV and ozone; the joint follows the structure at any skew angle from 0° to 90°. Fast, low-disruption installation, a replaceable rubber element, and a smooth, low-noise ride.
EX-S · ±25–90 mm
Single-element joints for standard bridge and deck movements.
EX-L · ±70–170 mm
Heavier sections for larger movements on bridges and viaducts.
EX-XL · ±100–500 mm
Modular multi-element joints for very large seismic spans.
FULL DIMENSIONAL TABLES (PROFILE WIDTH, ANCHORAGE, MODULE LENGTH, BOLT SPEC) FOR EVERY MODEL EX 50 – EX 1000 SUPPLIED WITH QUOTATION · ELASTOMER HARDNESS 60±5 Sh A · 100% WATERPROOF SYSTEM
Send Joint Schedule For PricingAsk About a Model on WhatsAppHDRB, LRB & ball rubber bearings
Seismic isolators lengthen the structure’s natural period and dissipate earthquake energy as heat — with equivalent viscous damping up to and beyond 30%.
HDRB
Strong recentring after an earthquake, lower stiffness for a longer natural period.
LRB
Lead core — rigid under wind and braking, damping beyond 30% when the earthquake comes.
BRB
Ball rubber bearings for specialised isolation schemes. EN 15129 performance tables with every proposal.
Sealing systems for segmental tunnel linings
Glued, anchored, hybrid, co-extruded and omega gasket types — designed and tested for the water pressure, gap and offset tolerances of your segment design. Design support and gasket analysis available for your ring geometry, with load-deflection and watertightness test diagrams supplied.
Type-tested. CE-documented. Proven since 2003.
Product certificates
CE documentation for elastomeric bearings, high-damping bearings, lead rubber bearings and expansion joints — type-tested to EN 1337 and EN 15129.
Test reports with every submittal
We do not hide test data behind sales calls. Certificates and type-test reports are supplied with every quotation and submittal pack, ready for consultant approval.
Management systems
ISO 9001 quality and ISO 14001 environmental management, with manufacturing capacity certificates. Installation guidance to EN 1337-11.
Approved-equal submittals prepared to consultant format — submittal pack and dimensional tables. Ask for the pack.
From BOQ to priced, submittal-ready offer
1. Send your BOQ or drawings
Use the form or WhatsApp — joint schedule, bearing schedule, loads, or just the drawings you have.
2. Engineering review
Our engineers size bearings and joints to your actual loads and movements. Values are never estimated.
3. Priced offer, fast
Factory-direct pricing with dimensional tables, CE documentation and type-test reports — ready for consultant submittal.
Get your project priced
Specified another brand? Send the spec — we quote approved-equal systems with the test data to back it.
Send Your BOQ — Priced FastWhatsApp an Engineer Now